BNRPV - 600 INDUSTRIAL ENAMEL 11136, B60011136

  • MSDS: BNRPV
  • Manufacturer: DAVLIN PAINT CO INC
  • Product Name: 600 INDUSTRIAL ENAMEL 11136, B60011136
  • National Stock Number: 8010-00-527-3198
Product Identification

Product ID:600 INDUSTRIAL ENAMEL 11136, B60011136
MSDS Date:03/20/1992
FSC:8010
NIIN:00-527-3198
MSDS Number: BNRPV

Responsible Party
DAVLIN PAINT CO INC
BERKELEY, CA 94702
US

Emergency Phone: 800-424-9300 CHEMTREC

Info Phone: 510-848-2863

Preparer: PATRICIA SHAW

Cage: 3Z268

Contractor
DAVLIN PAINT CO INC
2308 BERKELEY, CA 94702 US

Telephone: 510-848-2863

Cage: 3Z268

Ingredients

HYDROCARBON MIXTURE (VAPOR PRESSURE 2.0MM HG @ 68F)

CAS: 64741-41-9

Fraction By Weight: 32%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: RESP IRRIT, NARCOSIS (CNTRL
NERV SYS DEPRESS). EYE: SEVERE IRRIT. SKIN: IRRIT, DEFAT,
DERMATITIS. INGEST: DIGEST TRACT IRRIT, CNTRL NERV SYS DEPRESS.
ASPIRATION HZD. MAT'L CAN ENTER LUNG DURING INGEST/VOMIT, CAUSE
LUNG INFLAMM. CNTRL NERV SYS, RESP SYS, LUNG, EYE, SKIN, GI TRACT,
LIVER, SPLEEN, KIDNEY DAMAGE.
Effects of Overexposure:INHALATION: DIZZINESS, WEAKNESS, FATIGUE,
NAUSEA & HEADACHE. EYE: TEARING, REDNESS, BLURRED VISION.
Medical Cond Aggravated by Exposure:RESPIRATORY TRACT IRRITATION,
DERMATITIS, NAUSEA.

First Aid

First Aid:EYE: FLUSH W/WATER 15 MIN, LIFTING EYELIDS. GET MED AID.
SKIN: REMOVE CONTAM CLOTHES, WASH W/SOAP & WATER. IF IRRIT
PERSISTS, SEE DR. INHAL: REMOVE TO FRESH AIR. APPLY ARTIF
RESPIRATION OR ADMIN OXYGE N IF NEEDED. CONSULT DR. INGESTION: GIVE
WATER/MILK TO DRINK. TELEPHONE FOR MED ADVICE. DON'T INDUCE VOMIT
UNLESS DIRECTED BY MED PERSONNEL. IF MED ADVICE UNAVAIL, TAKE TO
NEAREST EMERGENCY HOSPITAL.

Fire Fighting

Flash Point Method:SCC
Flash Point:104F,40C
Lower Limits:1.0
Upper Limits:6.1
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE EXTINGUISHERS DESIGNED TO EXTINGUISH NFPA
FLAMMABLE LIQUID FIRE. WATER MAY BE INEFFECTIVE, USE AS FOG FOR
COOLING. WEAR FULL PROTECT CLOTH & BREATHING APP.
Unusual Fire/Explosion Hazard:VAPOR FORM EXPLOS MIX W/AIR BETWEEN LEL &
UEL WHICH CAN BE IGNITED BY MANY SOURCES. CLSD CNTNR MAY EXPLODE
W/HEAT. ISOLATE FROM HEAT, ELEC EQUIP, SPARKS, FLAME.

Accidental Release

Spill Release Procedures:EVACUATE NON ESSENTIAL PERSONNEL. REMOVE
IGNITION SOURCE. VENT AREA. PROVIDE APPROPRIATE PROTECTIVE
EQUIPMENT. DIKE AROUND SPILL AREA. COVER SPILL W/ABSORBENT &
TRANSFER USING NON-SPARKING TOOLS.

Handling

Handling and Storage Precautions:STORE BELOW 80F IN A CLOSED. STORE IN
ORIGINAL CONTAINER. AVOID FLAMES & HIGH TEMPERATURES. DO NOT STORE
NEAR OXIDIZING AGENTS OR ACIDS.
Other Precautions:DON'T INGEST, AVOID PROLONGED INHAL OF HEATED VAPOR
OR SPRAY MIST. KEEP AWAY FROM HEAT. GROUND CONNECTIONS, CONTAINERS
WHEN POURING/TRANSFERING. USE NON-SPARKING TOOLS. VAPOR HEAVIER
THAN AIR, MAY TRA VEL DISTANCE TO IGNIT SOURCE, FLASHBACK.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED EQUIPMENT WHEN AIRBORN
EXPOSURE LIMITS ARE EXCEEDED. CONSULT RESPIRATOR MFR FOR APPROP
EQUIP FOR GIVEN APPLICATION. HIGH AIRBORNE CONCENTRATIONS MAY
REQUIRE THE USE OF SUPPLIED AIR RESPIRATOR OR SCBA.
Ventilation:PROVIDE SUFFICIENT VENT TO CONTROL EXPOSURE LEVELS BELOW
AIRBORNE EXPOSURE LIMITS. VENT EQUIP MUST BE EXPLOSION PROOF.
Protective Gloves:CONSULT GLOVES MFG TO DETERMINE TYPE.
Eye Protection:USE CHEMICAL SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:IMPERMEABLE APRONS & PROTECT CLOTHES TO
PREVENT REPEATED/EXTENDED SKIN EXPOSURE. HEADCAPS ARE STRONGLY
RECOMMENDED.
Work Hygienic Practices:AFTER USING WASH BEFORE EATING, TOILETING OR
SMOKING.
Supplemental Safety and Health

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:315F,157C
Vapor Density:> AIR.
Spec Gravity:1.0 (WATER=1)
Evaporation Rate & Reference:SLOWER THAN ETHER.
Solubility in Water:NOT WATER SOLUBLE.
Appearance and Odor:PIGMENTED LIQUID, SOLVENT ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:DO NOT EXPOSE TO HEAT OR IGNITION SOURCES.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
DIOXIDE &/OR MONOXIDE, LOW MOLECULAR WEIGHT HYDROCARBONS AND
ORGANIC ACIDS.

Disposal

Waste Disposal Methods:KEEP OUT OF DRAINS, SEWERS & WATERWAYS. DISPOSE
OF PRODUCT IN ACCORDANCE WITH LOCAL STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.